Computerized slug detector (SD-401/402)

Application :

Punch Die dead Detector also names computerized slug detector, suitable for precision metal stamping (precision terminal) products for high-speed automatic stamping process bruised, abnormal thickness of the material, stamping overlap is difficult to visually detect the adverse situation of the measure to be precise detection and timely shutdown, effectively protect the mold, improve product quality and production to make up for human error, lower defect rate, to achieve high-quality automated detection.

Product Features
SD-401-One basic unit, Single output device (Single Port)
SD-402-One basic unit, Dual output device (Dual Ports)

1.Sensor operation setup distance: Location(A)from 0.8mm to 1.2mm,please press setup switch thereafter 199-0 displayed ,Move the iron block of the sensor head ,it can be adjusted to 80~120 as operation distance. (Meaning 0.8mm to 1.2mm ) Press setup switch again after set-up process.
2.Operation of monitoring value setup: Accuracy range set up from ±1μm~±99μm,depends on your exact accuracy requirement.
3.While stamping die starts running, the first four times displaying digits meaning the average of the die-height testing.(It will be re-calculated while stamping machine power off or the sensor line out of the basic unit and re-plug-in).
4.Self-Check functions available.
5.This product provides precision set-up value as 1μm, it is selectable against different accurate toolings.
6.Options available for Error-Carry-On, Missing material (by Electro-Eyes sensor) and Material Jammed (By sensoring Bar)

Specifications：